Tag Archives: products

Buckeye to Proceed with Second Phase of Michigan/Ohio Pipeline Expansion

Buckeye Partners will move forward with the second phase of the Michigan/Ohio Pipeline expansion following a successful open season for transportation of refined petroleum products from origin points in Woodhaven and Detroit, MI; Toledo, Findlay and Lima, OH, and Midland, PN. Buckeye plans to reverse a portion of its existing Laurel pipeline to allow refined petroleum products to flow from Pittsburgh to central Pennsylvania. The open season closed Oct. 18, and the project is expected to be completed by the end of 2018. “Evolving market conditions across the region continue to support the movement of […]

Rangeland Energy Brings RIO Pipeline into Service

Rangeland Energy has brought the 110-mile, 12-inch RIO Pipeline into commercial service transportation of crude oil and condensate to market from the Delaware Basin. The 125,000 bpd pipeline originates at the RIO State Line Terminal in Loving County, TX, a gathering hub at the Texas-New Mexico border in the heart of the Delaware Basin with tankage and truck unloading facilities. The RIO will connect to Rangeland’s Geneva and Zurich terminals in Midland, which will connect through Plains Pipeline’s Midland terminals to other area terminals and interstate pipelines that access Cushing, East Texas and Gulf Coast […]

South Korean Company Pays $21 Million to Fake Aramco

May 2016, Vol. 243, No. 5

After making a $21-million wire payment to a fraudulent company account claiming to be that of Saudi Aramco, South Korea’s largest petrochemical company, LG Chem, is now seeking a full investigation and state assistance to recover its loss. The $21-million payment was destined for Saudi Aramco, which is LG Chem’s supplier in Saudi Arabia of naphtha, the refined oil product used to make plastics and other petrochemical items. The payment was for supplies received in the second half of March. “We have requested an investigation by prosecutors,” said Song Choong-seop, a spokesman for LG Chem. […]

Pembina Pipeline Gains Regulatory OK for Phase III Expansion

April 2016, Vol. 243, No. 4

Calgary-based Pembina Pipeline received approval from the Alberta Energy Regulator for the construction of two 270-km, 24- and 16-inch pipelines between Fox Creek and Namao. The project is part of the company’s Phase 3 Expansions. Once complete, Pembina will have four pipelines in the Fox Creek-to-Namao corridor, with an initial total design capacity across the company’s Peace and Northern systems of about 900,000 bpd. Through the addition of pump stations capacity could reach about 1.2 MMbpd, the company said. Each of the four pipelines will transport different products – crude oil, condensate, propane-plus and ethane-plus. […]

Ditch Witch

April 2016, Vol. 243, No. 4

Ditch Witch®, a Charles Machine Works Company, has introduced its new line of walk-behind trenchers with six models – the C12, C14, C16, C16X, C24X and C30X. Each is designed to ease operator use, improve jobsite performance and maximize ROI for equipment rental companies. The lineup utilizes the Ditch Witch 35K digging system or the new exclusive OptiCut™ digging system – both specifically designed to work with Ditch Witch trenchers to optimize production and performance. Also new is the construction-grade SK752 mini skid steer that provides operators with an operator station featuring easy-to-use controls and […]

A & E Construction Supply, Inc.

April 2016, Vol. 243, No. 4

The Wolfe Man 8000 Extreme Duty is the latest and toughest wheel machine provided by A & E Construction Supply, which is manufactured by Wolfe Man International. It is built to perform in extreme dirt conditions, capable of going 8 feet deep and 34 inches wide. The Wolfe Man 8000 XD has 1½-inch rims and buckets, large hoist cylinders, adaptable Kennametal tooth holders, along with heavy-duty lift slides, cables, bearings, heat-treated buckets, large-diameter lower wheel rollers, and wide drive sprockets and wheel segments. www.plowandtrencher.com

SlatTrax

April 2016, Vol. 243, No. 4

SlatTrax® is offering a ground protection system designed for use with a skid loader that rolls out or retrieves to provide up to 100 feet of temporary roadway in two minutes. The system includes a hydraulically powered attachment that holds dual spools of Trax – each 36 inches or 42 inches wide and up to 100 feet long. Breakpoint sections allow for manual maneuvering. The company says SlatTrax is an alternative to plywood and mats and can be used on hills, curves, turf and hard cover. An optional trailer holds a complete SlatTrax system with […]

Intercon Enterprises Inc.

April 2016, Vol. 243, No. 4

The problem of quickly aligning different sizes of pipe with one clamp and, at the same time, having a sturdy tool that stands up to heavy field use is answered with the INT pipe alignment clamps. With the INT Series of pipe alignment clamps a welder can invest in three clamps that cover a range of ¾-to 12-inch pipe. A heavy-duty forged steel design includes electroplating for rust and spatter resistance. The three models are INT 1-3, INT 2-6 and INT 6-12 and cover the respective pipe sizes.www.intercon1978.com.

Miller Electric Mfg. Co.

April 2016, Vol. 243, No. 4

Miller Electric Mfg. Co. released its 116-page catalog showcasing everything from the Millermatic® 125 Hobby MIG and Millermatic® MIG Welder systems to welder generators, helmets and protective eyewear. Miller can provide specs and comparisons on MIG welders, TIG welders and torches, stick welders, metal cutting and engine-driven welder/generators, as well as automation, training solutions, fume extractors and Arc Armor® welding protection. MillerWelds.com  

Huntingdon Fusion Techniques

April 2016, Vol. 243, No. 4

When tubes and pipes of certain materials, such as stainless steel, titanium, copper-nickel and zirconium are welded together it is desirable to purge the oxygen out of the inside of the weld zone to prevent it from reacting with the hot metal and causing oxidation, porosity, discoloration and loss of corrosion resistance. Now, Huntingdon Fusion Techniques HFT® provides Argweld® Weld Purge Film™ kits, with water-soluble materials that can be used for open assemblies and closing welds. The film produces an impenetrable purge barrier that can easily be washed away when hydrostatically testing the pipe or […]

Keytroller

April 2016, Vol. 243, No. 4

Keytroller is offering Cyperwatch SAT— a satellite wireless hour, alarm and location meter designed to locate and track equipment in remote locations that don’t typically have cellular or WiFi. Cyberwatch CYBERWACCYCH SAT provides equipment monitoring from anywhere in the world, without the need for a SIM card or local wireless plan –for a monthly fee. Utilizing the Iridium network, the device transmits up to six-hour meter readings and six alarm readings with GPS location, once per day. This data can then be viewed in the client’s own web portal or sent to a smartphone where […]

Conval

April 2016, Vol. 243, No. 4

Conval offers Clampseal Throttling Valves for severe service applications that require repeatable flow control and dependable shutoff. The valves are available in ½ – to 4-inch sizes through ASME Class 4500. Standard forging materials include SA 105, SA 182-F22, SA 182-F91, SA 182-F92, and SA 182-F316. The venturi is an integral part of the removable seat. Both the seat and the stem assembly are easily changed inline should flow characteristics change or replacement due to excessive corrosion or wear be necessary. The orifice is sized to keep fluid velocity across the seat below damaging levels. […]