June 2016, Vol. 243, No. 6

Features

The Downstream Frontline for Integrity Management

Recent news headlines around gas storage incidents highlight the fact that it is not only oil and gas-producing wells that need continuous real-time integrity monitoring to avoid catastrophic leaks.

According to the International Energy Agency’s (IEA) most recent forecasts, we can expect a sustained period of growth in natural gas consumption over the next few years. The IEA predicts that by 2040, gas will be second only to oil as the largest source of energy worldwide, knocking coal into third place. At that point, gas will account for 24% of the global energy mix.

If we look at the European Union’s energy mix, we can see an even more dramatic increase in gas consumption. Although energy demand in the European bloc has remained relatively stable, over the past two decades there has been a radical shift in the balance of energy sources, with a 41% increase in demand for gas, compensating for a 41% reduction in the use of coal as an energy source. As pressure mounts to embrace the use of  ‘clean’ fuels in energy production, this growth can be expected to continue.

But Europe also illustrates a key challenge in providing for this increased gas consumption: matching demand with supply. The countries with the largest reserves of natural gas – Norway, the Netherlands and the UK – have all peaked in production levels and are now recovering less gas every year.

Over the past 10 years, swing ratios have averaged at 47% in France, 36% in Denmark and Germany, and 34% in the Netherlands and the UK. Whereas meeting swing supply was previously accomplished through flexibility of indigenous gas production, decreased production volumes mean that an alternative source has to be found.

All this points to a greater demand for storage facilities in order to maintain a reliable energy supply throughout the year and mitigate against supply – and price – volatility for the end consumer in Europe and beyond.

For all of these reasons, underground storage that takes advantage of existing but depleted reservoirs, salt caves or aquifers, makes a great deal of commercial sense for any company involved in the production and transmission of natural gas. Particularly in the case of depleted reservoirs, much of the infrastructure is already in place, so the wells that were installed to create a production facility can potentially be reused to support the storage activities.

Operators of underground gas storage (UGS) wells have to be confident that they have complete control over their integrity. The well tubing, well casing, casing cement bond, sealing elements in the wells, packers, wellhead seals, and valves all present opportunities for leakage. Without control of each of these components, the whole well loses integrity.

Should a breach occur, with risk of a leak or major blow out, the storage facility not only poses significant risks to health, safety and the environment, it is quite literally leaking profits. Well integrity management provides further operational cost reduction by optimizing the scheduling of well activities like maintenance and inspections as well as real-time risk assessment for activity prioritization.

Of course, it’s not just day-to-day revenue that’s at stake. The environmental concerns that drive demand for gas in the first place also mean that regulators and other government bodies take a negative view of any leaks and the impact they have on public health, land values and efforts to improve air quality and reduce carbon emissions. Since the most cost-effective storage facilities are located fairly close to end-users, there is an inevitable reputational consequence, plus likely fines and other financial penalties to be paid. The eventual costs of a leak can far exceed a lost month of revenue. In extreme cases, criminal convictions can arise and the entire license to operate may be at risk.

The past decade has seen well integrity management become part of the standard approach to operational control and risk mitigation associated with well operations. It is increasingly accepted that real-time monitoring and analysis of an infrastructure’s integrity is the key factor in identifying potential well failures. Only with the combination of real-time data evaluation and in-time warnings of developing problems that advanced well integrity management systems offer, can upcoming breaches of well integrity be identified and mitigated. Operating without these systems in place risk the potentially massive costs and consequences of a well blowout. No operator need take that risk, for any type of oil or gas operation, including those with underground gas storage facilities.

Related Articles

Comments

{{ error }}
{{ comment.comment.Name }} • {{ comment.timeAgo }}
{{ comment.comment.Text }}